Cast Iron • TIG • Wiring 0 Comments

Amtec 3 Cast Iron MIG

Amtec 2 Cast Iron MIG is a solid bare wire whose properties are of a full nickel metallurgical structure. It is designed for use on ductile, malleable and grey cast irons in all positions where easily machined welds are required. The wire may be used with the MIG process utilizing the spray, pulsed-arc or short-arc methods. Reverse Polarity with Constant Voltage is required for MIG applications. Argon/CO2 (75/25) should be used for MIG applications. This product produces ductile welds, while maintaining high machinability.

Download the product information .pdf for more details.

Cast Iron • TIG • Wiring 0 Comments

Amtec 2 Cast Iron MIG

Amtec 2 Cast Iron MIG is a solid bare wire whose properties are of a unique nickel-iron-manganese metallurgical structure. It is designed for use on ductile, malleable and grey cast irons in all positions and at high deposition rates of up to 18 lbs. per hour. The wire may be used with the MIG process utilizing the spray, pulsed arc, or short-arc methods. Reverse Polarity with Constant Voltage is required for MIG applications. Argon/CO2 (75/25) should be used for MIG applications. This product produces high strength and ductile welds, while maintaining machinability and color-match.

Download the product information .pdf for more details.

Wiring 0 Comments

Amtec W1610 MC Hardsurfacing Wire

Amtec W1610 MC is an extra high carbon, chromium carbide hard overlay that is designed for extreme abrasion and abrasion combined with mild impact. This alloyed hardsurfacing wire can be used on carbon, alloy, manganese, and stainless steels. Amtec W1610 MC may be used without a gas coverage, however with .045 and 1/16 wire, shielding gas is recommended if out of position welding is desired. Shielding gas will cause the amperage to go up by about 10%

Download the product information .pdf for more details.